Premium Meker Bunsen Burner, Natural Gas – StabiliBase

• PREMIUM DESIGN || The Meker Bunsen burner is designed for finely controlled air and gas mixture. Provides a safe, continuous stream of flammable gas used for heating, sterilization and combustion. This burner produces a shorter, much hotter flame than traditional burners
• FOR NATURAL GAS || Suitable for use with natural gas. Burner comes equipped with a serrated inlet arm that accepts 6-8mm tubing
• CAST IRON BASE || This improved design has an extended cast Iron base (4.5″ x 4.5″) that prevents tipping, even when hoses are connected. Burner feet are spaced at all four corners for added stability and allows burner to fit comfortably under stands. Burner equipped with a sturdy “Candle stick holder” handle. This safety feature is casted into the base to allow user to move burner without getting harmed
• ADJUSTABLE || This burner is equipped with a brass flame stabilizer tip and two adjustable features – a threaded air flow adjustment to control the oxygen that is drawn into the tube, and a gas adjustment underneath the burner
• MANUFACTURED BY EISCO LABS || Eisco Labs proudly manufactures its own products using state-of-the-art equipment, and following the highest standards of quality control. Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind

This premium Meker Bunsen burner is designed for finely controlled air and gas mixture. Produces a shorter, much hotter flame than traditional burners. Provides a safe, continuous stream of flammable gas used for heating, sterilization and combustion. This burner is equipped with a brass flame stabilizer tip and two adjustable features – a threaded air flow adjustment to control the oxygen that is drawn into the tube, and a gas adjustment underneath the burner. Expanded Meker type top with Monel stabilizing and heat intensifying grid that measures approximately 1.75″ in diameter. Jetted for natural gas. Natural Gas Meker burners have a BTU range usually 600 -1100. Maximum Temperature is approximately 1780°C (3236°F).
This burner is equipped with casted ribbed fuel input tube with an 8mm outside diameter – Recommended neoprene tube (not included) to connect burner to fuel source is Eisco Labs Neoprene Hose – available in 2 ft or 3 ft length options (CH0100A or CH0100B). Each end of the tubes has a flexible end that can fit a variable diameter of 0.28″ to 0.42″ (8-10mm) to accept a variety sizes on different burners.
Burner measures 8.5″ tall, and base measures 4.5″ wide and long.